Parafin heater 150W, Depileve

EAN Code / Package Code : FI73457824 8435179356092 PARSCDECP01

Producer : EU Europe

Importer : Depilé

Pack : 1 tk

Depileve paraffin bath, power: 150W

Temperature 2-step (50,80C) regulator: OFF-LOW/Min-HIGH/Max

Instructions for use:

Clean the inside of the bath before first use.

Clean the inside of the bath before first use.

Inject the paraffin into the heater, turn on the mains and set to MAX temperature and wait 0.5–1h.until the paraffin has become a watery liquid. Make sure there is no more paraffin than the maximum level indicator (MAX).

Before starting the procedure, you can set the unit to a min.temperature of 50C (LO) or turn it off (off).

On the bottom of the paraffin bath, once the paraffin has melted, replace the tray provided.

Prepare your hands in advance:

Apply an exfoliating cream to the hands or feet to deeply cleanse the skin – using massaging motions, rub the exfoliating cream over the skin for 2–5min.

Wash off with lukewarm water and pat dry.

Then use the hand cream to moisturise the hands or the foot cream to moisturise the feet – massage into the skin.

Soak your hands in the bath paraffin and lift out over the bath – wait 10–20 seconds and then repeat:
Place hand in the bath paraffin and lift out over the bath – wait 10–20 seconds and repeat
Do this 3 to 5 times in total while waiting for each layer to dry.

A sufficiently thick layer of paraffin should then have built up on the skin.

Place your hand or foot in a plastic bag or wrap and cover with a soft glove, towel or soft footmuff that will not allow your body temperature to drop.

Wait for 15–30min.

Remove the plastic bag and the paraffin from your skin and reapply the cream.

Once the paraffin has been removed from the skin, it is recommended not to use it twice.

Warnings:.

Do not turn on an empty heater without liquid or paraffin and do not leave unattended.

Before applying paraffin to the skin, make sure it is not scorching hot.

Please switch off the appliance before use.